آموزش فلش کردن D880 سامسونگ با نرم افزار D880 Flasher
این آموزش به زبان اصلی است و به طور اختصاصی از همین سایت پخش گردیده و هر گونه کپی برداری
باذکر منبع مجاز است.
At First of all you need to download the Samsung D880 Flasher software named "GEM Downloader for Samsung D880" and of course Firmware files which comes in two files combination BIN and TFS.
How to do Flashing
1. Open "GEM Downloader for Samsung D880" Flasher application software
2. Choose the right port through which your Cable attached like COM1, COM4, and also choose
the speed "921600"
3. after that Check Mark the option of "ARM9" which is on top-left of the application software, after check mark of "ARM9" you will see that "ARM9 Download" section will enable in software now click on the option "BIN+TFS" which will allow both BIN and TFS files loading buttons.
4. Now open BIN file by clicking BIN button and also Load the TFS file by clicking TFS button.
5. Also check the option "Don't Auto NAND Format" which will save your mobile contents.
6. later than Turn off your mobile take out SIM card, the attach mobile to the cable and push the hold down the power key until you see your phone phone description if in software, then put off your cell and click on download button.
7. It will take 20 to 30 minutes to download the Firmware.
8. After finishing the flashing process, cut off your phone, remove battery for ten seconds, then again connect your battery and start your phone.
Note:
Make confident your mobile's battery is fully charged before starting flashing procedure.
Any mistake can make dead your phone so begin flashing when you realize all things.
دانلود :
منبع و پسورد : www.sokia.blogfa.com
+ نوشته شده در دوشنبه سیزدهم دی ۱۳۸۹ ساعت ۸:۹ ب.ظ توسط میلاد
|
سلام بچه ها SOKIA تقدیم میکند...